Phoenix Tarvos UF0661K £6000 Floor Security Safe

The Phoenix Tarvos UF0661K Underfloor safe is designed to protect your cash and valuables from theft, and has a recommended cash rating of £6,000 (£60,000 for valuables). The Phoenix Tarvos UF0661K under floor safe is constructed with a square 168x168mm door secured by a hardened 6mm thick plate and 25mm diameter spring loaded front bolt and 25mm diameter dead bolt. The safe coated in a unique and environmentally friendly coating, and is key operated:

Features of the Phoenix Tarvos UF0661K Square Door Underfloor Security Safe

• Hidden underground for extra security
• Square Door allows easier storage of larger items
• £6,000 cash rating and £60,000 for valuables
• * Subject to agreement with your insurer if contents are being insured
• Double bitted VdS tested key lock as standard, with 2 keys supplied
• Hardened 6mm thick plate and 25mm diameter spring loaded front bolt and 25mm diameter dead bolt
• Dust cover included which fits at floor level
• The interior of the safe has a soft baize lining to prevent scratching and damage to jewellery
• Important:  Always place paper documents inside an air tight cover to prevent damage from condensation

Recommended Uses for the Phoenix Tarvos UF0661K Square Door Underfloor Security Safe

• Ideal for precious jewellery such as necklaces, diamond rings, sapphire brooches and earrings
• *Subject to your Insurer's agreement you can secure up to £60,000 of valuables or £6000 Cash
• Secure home and vehicle keys to prevent theft of that new car!
• Protect vital documents - keep in them in an air tight pocket to resist damage from damp
• Documents such as Deeds, Birth or Share Certificates, Passports
• Small valuable collectors items

How to install the Phoenix Tarvos UF0661K Square Door Underfloor Security Safe

• Select a position that would restrict a physical attack
• Remove safe door and keep clean
• Protect safe from any sand and cement entering via neck
• Remove floor covering to expose concrete floor
• Ensure no drains, cables, pipes are located beneath this area
• Mark out area at least 150mm wider than footprint of safe
• Dig away until depth is at least 75mm deeper than height of safe
• When fitted the top of the safe neck should not protrude above ground
• Replace any damp proof  membrane that has been disturbed
• Use high grade concrete e.g. 1 part Portland Cement to 5 parts ballast
• Add a water resisting additive before filling base of hole with 100mm of concrete mix
• Lower safe into the excavated hole until safe is level with ground surface
• Fit layers of weldmesh 50mm from safe sides to resist attack
• Check safe is level while filling 100mm layers of mix
• Do not fit locking lid, disturb or use safe within 7 days of installation