Churchill Bulldog CBS12 Extra Large Floor Security Safe

The Churchill CBS12 Bulldog Extra Large Floor Safe is ideal for securing larger valuables as the safe capacity and the safe door is the largest floor safe available in the UK. This Bulldog CBS12 Floor Safe is designed to protect both cash and valuables from theft, and has a recommended insurance cash rating of £6,000 or £60,000 for valuables such as jewellery.

Features of the Churchill Bulldog CBS12 Extra Large Floor Security Safe

• Bulldog CBS12 extra large under floor safe with a wide rectangular door
• Recommended Insurance Cash Rating £6,000 and £60,000 for valuables*
• Door is secured by 2 fixed and 2 locking bolts
• The large heavy door is air pump assisted to allow easy lift to enable the storage of larger items
• This safe is supplied with a double bitted VDS Class 1 key lock as standard with 2 keys
• The lock can be upgraded with either a mechanical dial or electronic digital combination mechanism
• The interior of the safe has a soft baize lining to prevent scratching and damage to jewellery
• This Bulldog CBS12 underfloor safe is supplied with full installation instructions.

Important: * Check with your insurer. 

Recommended Uses of the Churchill Bulldog CBS12 Extra Large Floor Security Safe

• Securing Cash up to value of £6,000*
• Protecting Jewellery to the value of £60,000*
• Jewellery such as Rings, Bracelets, brooches and necklaces
• Important documents such as passports, certificates, deeds**
• Vehicle and household keys - prevents theft of your new car!
• Larger, bulkier valuables for secure storage

 Important: ** Always place paper documents inside a air tight cover to prevent damp damage

How to install the Churchill Bulldog CBS12 Extra Large Foor Security Safe

• Select a position that would restrict a physical attack
• Remove safe door and keep clean
• Protect safe from any sand and cement entering via neck
• Remove floor covering to expose concrete floor
• Ensure no drains, cables, pipes are located beneath this area
• Mark out area at least 150mm wider than footprint of safe
• Dig away until depth is at least 75mm deeper than height of safe
• When fitted the top of the safe neck should not protrude above ground
• Replace any damp proof  membrane that has been disturbed
• Use high grade concrete e.g. 1 part Portland Cement to 5 parts ballast
• Add a water resisting additive before filling base of hole with 100mm of concrete mix
• Lower safe into the excavated hole until safe is level with ground surface
• Fit layers of weldmesh 50mm from safe sides to resist attack
• Check safe is level while filling 100mm layers of mix
• Do not fit locking lid, disturb or use safe within 7 days of installation