Britannia Winston CS004 9" Round Door Silver Floor Safe £6000

The Britannia Winston CS004 9" Round Door Silver Floor Safe is designed to protect your cash and valuables from theft, and has a recommended cash rating of £6,000 (£60,000 for valuables). The Britannia Winston CS004 9" Round Door Silver Floor Safe is constructed with a 36mm thick door coated in a unique and environmentally friendly coating, and is available with 3 locking options:

Features of the Britannia Winston CS004 9" Round Door Silver Floor Safe

• Hidden underground for extra security
• Secure Screw in Round door for extra security
• £6,000 cash rating and £60,000 for valuables
• * Subject to agreement with your insurer if contents are being insured
• Double bitted VDS KL1 key lock as standard, with 2 keys supplied
• Optional Digital Electronic Combination Lock
• Optional Mechanical Dial Combination Lock
• Secured by a 10mm stainless steel front bolt (live anti explosive device)
• Plus a Rear fixed 10mm stainless steel re-locker in case of attack
• 36mm solid steel round door has hardened dowels, hardened balls and a hardened plate covering all attack points
• Dust cover included which fits at floor level
• The interior of the safe has a soft baize lining to prevent scratching and damage to jewellery
• Colour - Blue RAL 5005
• Important:  Always place paper documents inside an air tight cover to prevent damage from condensation

Recommended Uses for the Britannia Winston CS004 9" Round Door Silver Floor Safe

• Ideal for precious jewellery such as necklaces, diamond rings, sapphire brooches and earrings
• *Subject to your Insurer's agreement you can secure up to £60,000 of valuables or £6000 Cash
• Secure home and vehicle keys to prevent theft of that new car!
• Protect vital documents - keep in them in an air tight pocket to resist damage from damp
• Documents such as Deeds, Birth or Share Certificates, Passports
• Small valuable collectors items

How to install a Britannia Winston CS004 9" Round Door Silver Floor Safe

• Select a position that would restrict a physical attack
• Remove safe door and keep clean
• Protect safe from any sand and cement entering via neck
• Remove floor covering to expose concrete floor
• Ensure no drains, cables, pipes are located beneath this area
• Mark out area at least 150mm wider than footprint of safe
• Dig away until depth is at least 75mm deeper than height of safe
• When fitted the top of the safe neck should not protrude above ground
• Replace any damp proof  membrane that has been disturbed
• Use high grade concrete e.g. 1 part Portland Cement to 5 parts ballast
• Add a water resisting additive before filling base of hole with 100mm of concrete mix
• Lower safe into the excavated hole until safe is level with ground surface
• Fit layers of weldmesh 50mm from safe sides to resist attack
• Check safe is level while filling 100mm layers of mix
• Do not fit locking lid, disturb or use safe within 7 days of installation